Устройство плавного пуска ATS22 230В(39кВт)/400-440В(55кВт)

   Устройство плавного пуска серии Altistart 22, 110А, мощность 55 кВт, 380В, Schneider Electric

 

• Технические данные продукта
• Руководство пользователя
• Каталог
• Документ CAD

Основные характеристики

Серия продукта	Altistart 22
Тип продукта	Устройство плавного пуска
Назначение продукта	Асинхронные электродвигатели
Специальная область применения продукта	Pumps and fans
наименование компонента	ATS22
Число фаз	3 фазы
номинальное напряжение питания [Us]	230...440 В - 15...10 %
мощность двигателя, кВт	39 кВт 230 V AC 50/60Hz 55 кВт 400 V AC 50/60Hz 55 кВт 440 V
заводская настройка тока	100 А
рассеиваемая мощность, Вт	73 Вт для стандартных приложений
Категория применения	AC-53A
тип пуска	Пуск с контролем момента (токограничение 3,5 In)
номинал пускателя IcL	110 А для соединение в линии питания двигателя для стандартных приложений
степень защиты IP	IP20

Dimensions Drawings

Frame Size C

Dimensions

Mounting and Clearance

Precautions

Standards

The Altistart 22 soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1.

For environment pollution degree 3, install the Altistart 22 soft starter inside a cabinet type 12 or IP54.

 

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH ATS22 soft starters are open devices and must be mounted in a suitable enclosure. Failure to follow these instructions will result in death or serious injury.

 

Air Circulation

 

Leave sufficient free space to help the air required for cooling purposes to circulate from the bottom to the top of the unit.

 

Overheating

 

To avoid the soft starter to overheat, respect the following recommendations:

• Mount the Altistart 22 Soft Starter within ± 10° of vertical.

• Do not locate the Altistart 22 Soft Starter near heat radiating elements.

• Electrical current through the Altistart 22 Soft Starter will result in heat losses that must be dissipated into the ambient air immediately surrounding the soft starter. To help prevent a thermal fault, provide sufficient enclosure cooling and/or ventilation to limit the ambient temperature around the soft starter.

• If several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from the bottom soft starter can adversely affect the ambient temperature around the top soft starter.

 

 

Mounting

Connection Between the Fan and the Altistart 22 Soft Starter

 

1

Altistart 22 Soft Starter

2

Fan

 

 

 

Wall mounted or Floor-standing Enclosure with IP 23 Degree of protection

Introduction

To help proper air circulation in the soft starter, grilles and forced ventilation can be installed.

Ventilation Grilles

Forced Ventilation Unit

Connections and Schema

Power Terminal

Bar Style

 

Power supply and output to motor	Bar	b	20 mm (0.79 in)
		a	5 mm (0.2 in)
		Bolt	M8 (0.31 in)
	Cable and protective cover	Size	95 mm²
		Gauge	250 MCM
		Protective cover	LA9F702
		Tightening torque	18 N.m
			157.5 lb.in

 

Power connections, minimum required wiring section

 

IEC cable mm² (Cu 70°C/158°F) (1)	UL cable AWG (Cu 75°C/167°F) (1)
35	1/0

 

 

230 Vac control, logic Inputs (LI) 24 Vdc, 3-wire control

With Line Contactor, Freewheel or Controlled Stop

 

230 Vac control, logic Inputs (LI) 24 Vdc, 2-wire control,freewheel stop

 

Connection in the motor delta winding in series with each winding

Wiring

ATS22 soft starters connected to motors with the delta connections can be inserted in series in the motor windings.

The following wiring requieres particular attention. It is documented in the Altistart 22 Soft start - soft stop unit user manual. Please contact Schneider Electric commercial organisation for further informations.

Example

A 400 V - 110 kW motor with a line current of 195 A (nominal current for the delta connection). The current in each winding is equal to 195/1.5 or 130 A. The rating is determined by selecting the soft starter with a permanent nominal current (ICL) just above this current.